What Is the Best Base for Artificial Grass? Complete UK Guide
Choosing the right base for artificial grass is one of the most important parts of achieving an attractive, long-lasting artificial lawn.
Although homeowners often focus on the appearance, pile height and quality of the artificial grass itself, the groundwork underneath is just as important as the grass on top.
An unsuitable base can lead to uneven surfaces, sinking, movement, poor drainage and expensive repairs.
Whether you’re replacing an existing lawn, installing artificial grass in a muddy garden or transforming an outdoor area, understanding the different base materials can help you make an informed decision.
At Artificial Grass UK, we install artificial lawns throughout Liverpool, Wirral, Sefton and surrounding areas.
In this guide, we’ll explain the differences between MOT Type 1, MOT Type 3, granite dust, sharp sand and other materials, along with recommended base depths, drainage considerations and common installation mistakes.
Quick Answer: What Is the Best Base for Artificial Grass?
For many ordinary domestic gardens, a properly compacted crushed aggregate sub-base topped with a suitable fine levelling layer provides a stable foundation for artificial grass.
A common UK installation specification uses:
- Prepared and suitably compacted ground.
- An appropriate geotextile separation layer, where required.
- A compacted MOT Type 1 aggregate sub-base.
- A thin, levelled layer of granite dust or suitable sharp sand.
- A permeable weed-control membrane, where specified.
- The artificial grass itself, securely joined and edged.
However, this is not the best specification for every garden.
In locations with poor drainage, heavy clay soil or regular use by dogs, a more open-graded aggregate system, such as a correctly designed MOT Type 3 base, may be preferable.
The best base depends on soil conditions, drainage, the intended use of the lawn and the manufacturer’s installation requirements.
Read our professional artificial grass installation guide to learn more about the importance of correct groundwork.
Why Is the Base Under Artificial Grass So Important?
Artificial grass cannot compensate for poorly prepared ground underneath.
A properly constructed base provides stability, supports the artificial lawn and helps manage rainwater.
Prevents Sinking and Uneven Areas
If artificial grass is installed over loose or inadequately compacted material, sections of the lawn may settle unevenly.
This can create dips, ridges and soft areas that spoil the appearance of the finished surface.
Helps Manage Drainage
Most outdoor artificial grass products allow water to pass through their backing.
However, that water must then travel through the underlying materials and into the ground or an appropriate drainage system.
An unsuitable base can restrict this movement and contribute to waterlogging.
Provides a Stable Surface
A compacted aggregate base provides support under regular foot traffic, garden furniture and normal household use.
Improves the Finished Appearance
The final levelling layer helps create a smooth, consistent surface before the artificial grass is fitted.
Reduces the Risk of Future Repairs
Although good preparation cannot eliminate every potential problem, correctly installed groundwork can reduce avoidable sinking, instability and drainage defects.
Artificial Grass Base Materials Compared
There are several materials commonly used underneath artificial grass.
Each performs a different function, and not all are interchangeable.
Artificial Grass Base Comparison Table
| Material | Main purpose | Advantages | Limitations |
|---|---|---|---|
| MOT Type 1 | Structural sub-base | Compacts firmly and provides stability | Contains fines; not always suitable for maximum permeability |
| MOT Type 3 | Permeable structural sub-base | More open-graded, allowing water to pass more readily | Requires a compatible laying course and drainage design |
| Granite dust | Fine levelling layer | Produces a smooth, firm finish when correctly compacted | Not a replacement for structural aggregate |
| Sharp sand | Fine levelling layer | Widely available and relatively easy to screed | Can move or wash out in unsuitable installations |
| Clean angular chippings | Drainage or laying layer | Can form part of free-draining systems | Must be graded and compacted appropriately |
| Topsoil | Growing medium for natural lawns | Supports living grass | Unsuitable as the main structural base |
| Concrete | Existing hard foundation | Stable when sound | Requires adequate surface drainage |
For most traditional garden installations, MOT Type 1 or a suitable alternative provides the main structural support, while granite dust or sharp sand forms the finer laying course.
Is MOT Type 1 Good for Artificial Grass?
MOT Type 1 is one of the most commonly used aggregate materials for landscaping and artificial grass installations in the UK.
It normally consists of graded crushed stone with smaller particles and fines.
When properly installed and compacted, these different particle sizes help create a firm, stable surface.
Advantages of MOT Type 1
- Provides a strong structural sub-base.
- Compacts into a stable layer.
- Suitable for many domestic garden applications.
- Widely available from builders’ merchants.
- Can support a consistent finished lawn level.
Disadvantages of MOT Type 1
MOT Type 1 contains fine particles that help it compact tightly.
This is useful for stability but can reduce permeability compared with an open-graded aggregate.
Where an installation requires particularly high drainage capacity, Type 1 may not be the most appropriate choice.
Its suitability depends on the product specification, the ground underneath and the intended drainage design.
Our recommendation: MOT Type 1 can be an appropriate choice for a standard domestic artificial lawn where site drainage is suitable, but it should not automatically be specified for every garden.
What Is MOT Type 3 and Is It Better for Drainage?
MOT Type 3 is an open-graded aggregate commonly used in permeable construction applications.
Compared with conventional MOT Type 1, it generally contains fewer fine particles and allows water to pass through the voids between the stones more readily.
This can make it useful where drainage is a major consideration.
Benefits of MOT Type 3
- Provides a structural aggregate layer.
- Offers greater permeability than typical Type 1.
- Can form part of a free-draining artificial grass base.
- May be useful for heavily used pet areas.
- Can be incorporated into a designed drainage system.
Is MOT Type 3 Always Better?
Not necessarily.
An open-graded base needs to be designed with compatible materials above and below it.
If fine material from a levelling layer migrates into the voids, the base may lose some of its drainage performance.
Likewise, if Type 3 is installed over impermeable ground with no drainage outlet, water can still become trapped.
A suitable separator, laying course and drainage route may be required.
MOT Type 1 vs MOT Type 3
| Feature | MOT Type 1 | MOT Type 3 |
|---|---|---|
| Structural support | Good when correctly compacted | Good when correctly designed and compacted |
| Relative permeability | Lower | Higher |
| Fine particles | More | Fewer |
| Common domestic applications | Standard lawns and landscaping | Permeable and drainage-focused systems |
| Suitable for clay gardens | Depends on drainage | May help, but does not solve impermeable soil |
| Pet-friendly installations | Sometimes suitable | Often worth considering |
| Requires compaction | Yes | Yes |
The choice should be based on site conditions and not simply on which material is cheapest.
Is Granite Dust Better Than Sharp Sand for Artificial Grass?
Granite dust, sometimes called grano dust or grano-to-dust, is commonly used as a fine levelling layer over a compacted structural sub-base.
It helps create the smooth surface needed before artificial grass is fitted.
Advantages of Granite Dust
- Can be compacted into a firm, consistent finish.
- Suitable for fine surface levelling.
- Widely used in professional artificial grass installations.
- Often preferred where movement of the laying material is a concern.
However, granite dust contains fine particles and should not automatically be treated as a free-draining material.
Its grading and compatibility with the drainage design are important.
Can You Use Sharp Sand Instead?
Yes. Suitable sharp sand is used in some artificial grass installation systems.
It can provide a smooth levelling course and is readily available.
However, it must be installed at an appropriate thickness and compacted correctly.
In some circumstances, sand may move or wash out if water flows through the installation.
The manufacturer’s instructions should guide the choice.
Granite Dust vs Sharp Sand
| Feature | Granite dust | Sharp sand |
|---|---|---|
| Main use | Levelling course | Levelling course |
| Compaction | Often forms a firm finish | Depends on grading and installation |
| Availability | Depends on supplier | Widely available |
| Suitability for pet areas | Depends on system | Depends on system |
| Drainage behaviour | Depends on fines and grading | Depends on grading and construction |
| Best used alone as base | No | No |
Important: Neither granite dust nor sharp sand should normally replace a properly constructed structural sub-base where one is required.
For more technical information, see the Wickes guide to installing artificial grass, which explains the use of aggregate and fine levelling layers.
How Deep Should an Artificial Grass Base Be?
The correct depth depends on the existing ground conditions and the specification of the installation.
There is no single excavation depth suitable for every garden.
Typical domestic installation guidance often uses approximately 50–100mm of compacted structural aggregate, followed by around 20–40mm of suitable levelling material.
These figures are illustrative rather than universal requirements.
Example Base Depths
| Installation condition | Possible specification | Important consideration |
|---|---|---|
| Firm, well-draining ground | Suitable compacted aggregate plus thin laying course | Check ground stability |
| Typical garden soil | Engineered aggregate sub-base and levelling layer | Depth depends on the site |
| Heavy clay soil | Drainage-focused base with possible additional drainage | Must provide somewhere for water to escape |
| Frequently used pet garden | Stable, appropriately permeable base | Cleaning and drainage are important |
| Existing concrete | Turf-compatible drainage and fixing system | Check concrete condition and falls |
The final specification should take account of compaction, excavation depth, edging, grass thickness and the required finished surface levels.
A deeper aggregate layer is not automatically better if water cannot escape from the bottom of the installation.
Step-by-Step: How to Prepare a Base for Artificial Grass
Correct groundwork is essential for achieving a stable and attractive artificial lawn.
The following process explains the typical stages involved in preparing a domestic garden.
Step 1: Remove the Existing Grass and Unsuitable Materials
Start by removing the existing natural turf, roots and unsuitable surface material.
The required excavation depth will depend on the proposed aggregate construction and final lawn level.
Check for underground services before excavation, particularly near buildings, drains, cables and garden lighting.
Step 2: Inspect the Existing Ground
Once the area has been excavated, assess the soil.
Look for:
- Soft or unstable areas.
- Heavy clay.
- Standing water.
- Existing drainage pipes.
- Buried construction debris.
- Significant changes in ground level.
Any drainage or ground stability problems should be addressed before adding the new base.
Step 3: Establish Edging and Finished Levels
Install suitable edging where required to retain the base and provide secure artificial grass fixing points.
Edging might include compatible timber, composite edging, paving
